CME34MVD1200HR & CME34MVD1860HR
PCIe/104 Single Board Computer & Controller
1.20 GHz – 1.86 GHz Intel® Core™ 2 Duo
Key Features
¤ |
PC/104 form factor |
¤ |
PCIe/104 stackable bus structure |
|
◆ |
PCIe Type 2 expansion bus |
¤ |
Complete PC-compatible Single Board Computer (SBC)
|
¤ |
Intel Core 2 Duo GHz Processor on 45nm |
|
◆ |
Clock Speeds: 1.20 – 1.86 GHz |
|
◆ |
Max. Core Temperature: 105°C |
¤ |
User-selectable single-core operation
|
¤ |
2GB DDR2 Memory (Surface-Mounted) |
¤ |
Onboard Industrial SATA Flash Drive up to 32GB (4GB Standard) |
¤ |
Eight x1 PCIe Links |
¤ |
Four x4 PCIe Links |
¤ |
PCIe peer-to-peer communication |
¤ |
Three SATA Ports |
¤ |
Four Serial Ports (RS-232/422/485) |
¤ |
Six USB 2.0 Ports |
¤ |
Dual Gigabit Ethernet |
¤ |
Analog VGA |
¤ |
Advanced Digital I/O (aDIO) |
¤ |
-40 to +85°C standard operating temperature |
¤ |
Heat Sink Options |
|
◆ |
Thermal-optimized mini-fan heat sink included (standard) |
|
◆ |
Modified heat sinks and flat heat spreaders are available |
|
◆ |
The optional heat spreader shown on this page is designed for mounting to a cold plate |
|
|
|
|
|
|
|
Description
The CME34MVD is a powerful PC/104 single board computer with a PCIe/104 stackable bus structure. As a part of RTD's advanced PCI Express offering, this Intel Core 2 Duo based CPU is exceptionally suited for applications requiring performance-rich technologies. The surface-mount Type 2 PCI Express connectors enable users to stack multiple peripheral modules above and below the CPU. With PCI Express peer-to-peer communication, the CME34 allows direct data transfer between peripheral modules without loading the CPU. An optional 32GB flash drive makes this CPU Windows 7 ready.
Technical Details
- Stackable Expansion Buses
- Type 2 PCIe (stacking up)
- Four PCI Express x1 Links
- Two PCI Express x4 Links
- Two SATA Ports
- Two USB 2.0 Ports
- SMBus
- ATX Power Supply Signaling
- Type 2 PCIe (stacking down)
- Four PCI Express x1 Links
- Two PCI Express x4 Links
- One SATA Port
- Two USB 2.0 Ports
- SMBus
- ATX Power Supply Signaling
- Processor
- Intel Core 2 Duo SU9300 (Dual Core 1.20 GHz)
- Intel Core 2 Duo SL9400 (Dual Core 1.86 GHz)
- Processor Options Include:
- Execute Disable (XD/NX) Security
- 45nm Process
- Memory
- 2GB DDR2
- 800MHz SDRAM
- Dual Channel Interface for Increased Bandwidth
- Surface Mounted For Maximum Reliability
- Serial ATA (SATA)
- Up to 32GB Onboard Industrial SATA Flash Drive (4GB
Standard)
- Three additional SATA ports (two on the top bus
connector, one on the bottom)
- Use with drive carriers or cable kit
- SATA revision 2.0, up to 3.0Gbit/sec interface speed
- Supports IDE mode for legacy compatibility or AHCI mode
for improved performance
- Supports Intel Matrix Storage RAID
- RAID0 – Multiple Drives Striped for Performance
- RAID1 – 2 Drives Mirrored for Redundancy
- Intel RAID drivers or OS support required
- Drive Hot Plug supported in AHCI/RAID with appropriate
drive carrier (IDAN-RSATA-SYS104)
- Video
- Intel Graphics Media Accelerator 4500MHD
- Gen 5.0 graphics engine with 10 cores
- Dynamic Video Memory (32MB – 256MB)
- DirectX 10 Support
- Supports Windows Aero Glass Effects
- Analog VGA Interface
- Dual Gigabit Ethernet
- Intel 82567LM PHY + ICH9M Controller (PRO1000 Series)
- Intel 82574IT Controller
- 10/100/1000 Auto-negotiation
- Jumbo Frame Support
- PXE Network Boot
- USB 2.0
- Two ports onboard
- Four additional ports available via PCIe/104
- Over-current protection (500mA @ 5Vdc)
- USB Boot capability
- Serial Ports
- Four RS-232/422/485 serial ports on two connectors, each
connector configurable as:
- One full RS-232 port with TxD, RxD, CTS, RTS, DSR,
DTR, RI, and CD
- One RS-422/485 port with TxD+, TxD-, RxD+, RxD-
- Two RS-232 ports:
- One with TxD, RxD, CTS, and RTS
- One with TxD and RxD
- One RS-232 port with TxD and RxD, and one RS-422/485
port with TxD+, TxD-, RxD+, RxD-
- Two RS-422/485 ports each with TxD+, TxD-, RxD+, RxD-
- 120 ohm termination for RS-422/485 Mode
- Serial Ports Modes are BIOS-configured, no jumper
settings required.
- Standard PC 16C550 UART Interface
- Advanced Digital I/O (aDIO)
- One 8-bit-programmable I/O with Advanced Digital
Interrupt Modes
- Event Mode Interrupt
generates an interrupt when any input bit changes
- Match Mode Interrupt
generates an interrupt when input bits match a preset
value
- External Strobe Mode latches
8 data inputs and generates and interrupt
- One 4-bit port programmable as input or output
- Two Strobes can be configured as readable inputs.
- Thermal Management
- Thermal Throttling reduces clock speed to prevent
thermal runaway
- Auto Fan Control only runs fan when needed
- Hardware monitor for temperature and voltage
- Mini Fan Heatsink with Auto Fan control
- Passive Structural Heatsink & Heatpipes in IDAN and
HiDAN System Configurations
- Power Management
- Enhanced Intel SpeedStep – Dynamically throttle CPU
frequency/voltage based on processor load.
- ACPI 3.0 Support – Advanced Configuration and Power
Interface
- ATX Support for “Soft Off”
- Additional Hardware Features
- XK-CM77 Cable
Kit Included
- Watchdog Timer
- PS/2 Keyboard and Mouse
- Real Time Clock (external battery required)
- PC Speaker
- ATX Power Button Input
- Reset Button Input
Software
- RTD Enhanced BIOS
- Supports boot from SATA, USB, or Ethernet (PXE)
- Serial Console Redirection
- EEPROM-based CMOS Setup – No battery required to store
settings
- Fail Safe Boot – Load DOS even if no boot device is
present
- Special RTD Reliability Enhancements
- Compatible with all x86 PC operating systems:
- DOS (MS-DOS, ROM-DOS, PC-DOS)
- Windows (7, XP, Embedded Standard, XP Embedded)
- Linux (desktop and real-time versions)
- RTOSes such as QNX, VxWorks, Windows CE, and xPC Target
- Note: Some hardware interfaces may require special
drivers
- Includes pre-installed Datalight ROM-DOS
- Drivers and support provided for DOS, Windows, and Linux
Physical Attributes
- Dimensions
- Board Size
- Length (L): 3.775 inches (95.89 mm)
- Width (W): 3.550 inches (90.17 mm)
- I/O Extension
- Length (EL): 3.125 inches (79.380 mm)
- Width (EW): 0.500 inches (12.700 mm)
- Stand-off Height
- Above the CPU: 0.866 inches (22.00 mm)
- Below the CPU: 0.600 inches (15.24 mm)
- Weight: Approximately 0.44 lbs. (0.20 Kg) with heatsink
- Standard Operating Temperature, 90% humidity non-condensing
- 1.20 GHz: -40 to +85°C
- 1.86 GHz: -40 to +70°C
- Storage Temperature: -25 to +85°C
- Power Consumption
- CME34MVD1200 - 1.20 GHz: 14 W @ 5 V Typical (single-core
mode)
- CME34MVD1200 - 1.20 GHz: 17 W @ 5 V Typical (dual-core
mode)
- CME34MVD1860 - 1.86 GHz: 19 W @ 5 V Typical (single-core
mode)
- CME34MVD1860 - 1.86 GHz: 22 W @ 5 V Typical (dual-core
mode)
Recommended Accessories
- Cable Kit XK-CM99
- SATA Card Carrier
- ATX Power Supply
- PCI Express to PCI Bridge
Part Number |
Description |
CME34MVD1200HR-2048 |
Dual Core 1.20 GHz PCIe/104 cpuModule with 2GB DDR2 SDRAM & 4GB Removable Flash Drive |
CME34MVD1860HR-2048 |
Dual Core 1.86 GHz PCIe/104 cpuModule with 2GB DDR2 SDRAM & 4GB Removable Flash Drive |
|
|
TEL:027-82702749,82702750
FAX:027-82702769 |