固纬公司美国 RTD 全系列产品型录
(2003年度)
<<< Cpu Module <<< Utility Module <<< Data Module <<< Home |
PC/104plus DataModules with Universal PCI Bus
o HighRel Analog I/O & Digital I/O Bus Master
PC/104 DataModules with ISA Bus
o HighRel Analog I/O & Digital I/O
o HighRel Analog Output & Digital I/O
o Digital I/O, Counter/Timer & Incremental Encoder
o High Density Digital I/O, Counter/Timer & Incremental Encoder
PC/104plus HighRel Analog & Digital I/O Modules
PC/104-Plus HighRel Analog & Digital I/O dataModule with Bus Mastering | ||
Part Number | Description | |
DM7520HR-1 |
HighRel dataModule with Bus Mastering
|
|
DM7520HR-8 |
DM7520HR-1 with 8K FIFO buffer |
PC/104 HighRel Analog & Digital I/O Modules
PC/104 HighRel Analog
& Digital I/O dataModules | ||
Part Number | Description | |
DM6420HR-1 |
HighRel dataModule ANALOG INPUT: 12-bit, 500 kHz 8 differential or 16 single ended, 1K FIFO buffer, channel gain table, pacer & burst clocks, DMA, data markers & programmable gain of 1, 2, 4 & 8 ANALOG OUTPUT: Two channel 12-bit 200 kHz throughput USER TIMER/COUNTERS: Two 16-bit DIGITAL I/O: 16 buffered TTL/CMOS lines. Two independent ports of 8-Bits each. Port 0 is bit direction programmable. Port 1 is byte direction programmable. Advanced interrupt modes and bit masking. SOFTWARE: C & BASIC examples with source code and diagnostics; Windows 95 and Windows NT drivers with Visual C examples I/O CONNECTOR: One 50 pin .100" x .100" Header | |
DM6420HR-8 |
DM6420HR-1 with 8K FIFO buffer | |
DM6430HR-1 |
HighRel dataModule ANALOG INPUT: 16-bit, 100 kHz 8 differential or 16 single ended, 1K FIFO buffer, channel gain table, pacer & burst clocks, DMA, data markers & programmable gain of 1, 2, 4 & 8 ANALOG OUTPUT: 2 channels 16-bit 200 kHz throughput USER TIMER/COUNTERS: Two 16-bit DIGITAL I/O: 16 buffered TTL/CMOS lines. Two independent ports of 8-Bits each. Port 0 is bit direction programmable. Port 1 is byte direction programmable. Advanced interrupt modes and bit masking. SOFTWARE: C & BASIC examples with source code and diagnostics; Windows 95 and Windows NT drivers with Visual C examples I/O CONNECTOR: One 50 pin .100" x .100" Header | |
DM6430HR-8 |
DM6430HR-1 with 8K FIFO buffer |
PC/104 HighRel Analog Output & Digital I/O Modules
PC/104
HighRel
Analog Output & Digital I/O
dataModule | ||
Part Number | Description | |
DM6620HR-1 |
HighRel 12-bit 200 kHz 4 channel analog output
module. Independent 1K FIFO buffer on each channel, six 16-bit
counter/timers, 8 buffered bit direction programmable, 8 buffered port
direction programmable digital I/O lines. SOFTWARE: C & BASIC examples with source code and diagnostics; Windows 95 and Windows NT drivers with Visual C examples. I/O CONNECTOR: One 50 pin .100" x .100" Header | |
DM6620HR-8 |
DM6620HR-1 with 8K FIFO buffer |
PC/104 Analog Input & Digital I/O Modules
PC/104 Analog Input & Digital I/O dataModules | ||
Part Number | Description | |
DM6210 |
ANALOG INPUT: 12-bit, 40 kHz, 16 single ended and
resistor configurable gain USER TIMER: Three 16-bit DIGITAL I/O: 16 lines (four 4-bit ports) SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTOR: One 50 pin .100" x .100" Header |
PC/104 Analog Output & Digital I/O Modules
PC/104 Analog Output & Digital I/O dataModules | ||
Part Number | Description | |
DM6604 |
ANALOG OUTPUT:12-bit 100 kHz 8 channel analog output
module. DIGITAL I/O: 24 digital I/O lines. I/O CONNECTOR: One 50 pin .100" x .100" Header SOFTWARE: C & BASIC examples with source code and diagnostics |
PC/104 MOSFET Isolated Output & Optoisolated Digital Input Modules
PC/104 MOSFET Isolated Output Optoisolated Digital Input dataModules | ||
Part Number | Description | |
DM6852HR |
8 channel isolated MOSFET outputs. 4 optoisolated inputs
with three selectable voltage ranges. 24 non-isolated 8255 based digital
I/O lines. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTOR: 50, 48 & 16 .100" x .100" Headers. 24 & 8 position terminal blocks optional for isolated lines. | |
DM6854HR |
8 Channel optoisolated input module with 3 selectable
voltage ranges. Advanced interrupt modes and bit masking. 4 isolated
digital outputs (open collector). 24 non-isolated 8255 based digital I/O
lines. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTOR: 50 & 48 .100" x .100" Headers. 24 position terminal block optional for isolated lines | |
DM6856HR |
16 optoisolated inputs, 16 optoisolated outputs.
SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTORS: Two 50 pin .100" x .100" Headers | |
DM6858HR |
32 optoisolated inputs. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTORS: Two 50 pin .100" x .100" Headers |
PC/104 HighRel Relay Output Modules
PC/104 Relay Output dataModules | ||
Part Number | Description | |
DM6952HR-H |
16 channel SPDT mechanical power relay output board wtih NO
and NC contacts. 60VA switching capacity with voltages up to
240VAC SOFTWARE: C Diagnostics program and source code I/O CONNECTORS: Two 50 pin .100" x .100" Headers | |
DM6952HR-S |
16 channel SPDT mechanical power relay output board wtih NO
and NC contacts. 60VA switching capacity with voltages up to
240VAC SOFTWARE: C Diagnostics program and source code I/O CONNECTORS: Two 25 screw terminal connectors accepting 14-30 gauge wires |
PC/104 Digital I/O, Counter/Timer & Incremental Encoder Modules
PC/104 Digital I/O, Counter/Timer & Incremental Encoder dataModules | ||
Part Number | Description | |
DM6804 |
24 buffered 82C55 based digital I/O lines. Five AM9513 based
16-bit counter/timers. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTOR: One 50 pin .100" x .100" Header | |
DM6806 |
24 buffered 82C55 based digital I/O lines. Three 16-bit
counter/timers. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTOR: One 50 pin .100" x .100" Header | |
DM6810 |
48 buffered bit programmable digital I/O lines.
Three 16-bit counter/timers. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTORS: Two 50 pin .100" x .100" Header | |
DM6812 |
24 buffered bit direction programmable & 24 buffered
port direction programmable digital I/O lines. Advanced digital interrupt
modes and bit masking. Three 16-bit counter/timers.
SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTORS: Two 50 pin .100" x .100" Headers. | |
DM6814 |
Three 16-bit incremental encoder channels. 6 digital I/O
lines. 12 digital input lines. Three 16-bit counter/timers.
SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTORS: Two 50 pin .100" x .100" Headers | |
DM6816 |
Nine 8-bit pulse width modulator outputs. 9 digital outputs
and three 16-bit counter/timers. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTORS: Two 50 pin .100" x .100" Headers |
PC/104 High Density Digital I/O, Counter/Timer & Incremental Encoder Modules
PC/104 High Density Digital I/O, Counter/Timer
| ||
Part Number | Description | |
DM6910 |
48 buffered bit programmable digital I/O lines. Three 16-bit
counter/timers. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTOR: 3M 68 pin .050" x .100" Tripolarized Shrouded Header Mates with .050" x .100" Tripolarized IDC Mini Socket. (Compatible with 68 pin IDC subminiature SCSI-3 female and male connectors) | |
DM6912 |
24 buffered bit programmable & 24 buffered port
programmable digital I/O lines. Advanced digital interrupt modes. Three
16-bit counter/timers. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTOR: 3M 68 pin .050" x .100" Tripolarized Shrouded Header Mates with .050" x .100" Tripolarized IDC Mini Socket. (Compatible with 68 pin IDC subminiature SCSI-3 female and male connectors) | |
DM6914 |
Three 16-bit incremental encoder channels. 6 digital I/O
lines. 12 digital input lines. Three 16-bit counter/timers.
SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTOR: 3M 68 pin .050" x .100" Tripolarized Shrouded Header Mates with .050" x .100" Tripolarized IDC Mini Socket. (Compatible with 68 pin IDC subminiature SCSI-3 female and male connectors) | |
DM6916 |
Nine 8-bit pulse width modulator outputs. 9 digital outputs.
Three 16-bit counter/timers. SOFTWARE: C & BASIC examples with source code and diagnostics I/O CONNECTOR: 3M 68 pin .050" x .100" Tripolarized Shrouded Header Mates with .050" x .100" Tripolarized IDC Mini Socket. (Compatible with 68 pin IDC subminiature SCSI-3 female and male connectors) |
<<< Cpu Module <<< Utility Module <<< Data Module <<< Home |
PC/104-Plus UtilityModules™ with Universal PCI Bus
o Network
o Video
PC/104 UtilityModules™ with ISA Bus
o Network
o Video
o Modem
o Motion Control and Motor Interface
o Uninterruptible Power Supply
PC/104-Plus Network Module
PC/104-Plus HighRel Network utilityModule™ | ||
Part Number |
Description |
|
CM17205HR |
Independent Dual Fast Ethernet with 10/100Base-T and/or
MT-RJ Fiber interfaces SOFTWARE: DOS, Windows, QNX and Linux drivers. |
|
CM17202HR |
Fast Ethernet with 100Base-T, MII interface
SOFTWARE: DOS, Windows, QNX and Linux drivers. |
PC/104-Plus Video Module
PC/104-Plus HighRel SVGA
Video utilityModule™ | ||
Part Number |
Description |
|
CM17110HR |
SVGA controller supports CRT and/or Panel, 64-bit Hardware graphics-accelerator, 4 MB of 83 MHz SDRAM display memory and Programmable Flash BIOS; flat panel power switching and adjustable LCD bias supplies. | |
CM17120HR |
SVGA controller supports Super VGA and DVI, 64-bit Hardware graphics-accelerator, 4 MB of 83 MHz SDRAM display memory and Programmable Flash BIOS; DVI flat panel resolution up to 1600 x 1200 pixels. |
PC/104-Plus Frame Grabber Module
PC/104-Plus Frame Grabber utilityModule™ | ||
Part Number |
Description |
|
CM7326 |
Video Frame Grabber Card. Six composite
video signals (CVBS) or three pair brightness and color signals.
PAL, SECAM, and NTSC standard video signals, 25 full pictures per
second and 768 x 576 pixel resolution (PAL), 30 pictures per second
and 640 x 480 (NTSC), 8 bit greyscale mode, 16 bit YUV mode, 24 bit RGB
mode. SOFTWARE: Windows 95/98/NT drivers |
PC/104 Network Modules
PC/104 Network utilityModules™ | ||
Part Number |
Description |
|
CM202 |
NE2000 Ethernet with AUI, 10BASE-T and 10Base-2
interfaces SOFTWARE: DOS set up & utility drivers. Operating Temperature 0° to +70°C |
|
CM310HR |
Four 16C550 RS232/422/485 serial ports.
Pinout & function compatible with RTD cpuModules. SOFTWARE: DOS set up & utility drivers. Operating Temperature -40° to +85°C |
|
CM312 |
Four 16C550 RS232/422/485 serial ports and NE2000
ethernet with 10Base-T and 10Base-2 interfaces. Pinout &
function compatible with RTD cpuModules. SOFTWARE: DOS set up & utility drivers. Operating Temperature 0° to +70°C |
|
CM313HR |
Four 16C550 RS232/422/485 serial ports and
SMC9000 ethernet with 10Base-T and 10Base-2 interfaces. Pinout &
function compatible with RTD cpuModules. SOFTWARE: DOS set up & utility drivers. Operating Temperature -40° to +85°C |
|
ECAN527HR-1 |
Galvanically isolated CAN bus controller with
twisted pair interface SOFTWARE: Windows 95/98/NT 4.0 drivers, DOS examples and Linux drivers and examples. Operating Temperature -40° to +85°C |
|
ECAN527HR-2 |
ECAN527-1 with fiber optic interface.
SOFTWARE: Windows 95/98/NT 4.0 drivers, DOS examples and Linux drivers and examples. Operating Temperature -40° to +85°C |
|
ECAN527DHR |
2 Channel Galvanically isolated CAN bus controller
with twisted pair interfaces SOFTWARE: Windows 95/98/NT 4.0 drivers, DOS examples and Linux drivers and examples. Operating Temperature -40° to +85°C |
|
ECAN1000HR |
CAN bus interface with SJA1000 CAN-network
controller. SOFTWARE: Windows 95/98/NT 4.0 drivers, DOS examples and Linux drivers and examples. Operating Temperature -40° to +85°C |
PC/104 Video Modules
PC/104 SVGA
Video utilityModules™ | ||
Part Number |
Description |
|
CM110HR |
SVGA controller supports CRT, LCD, EL, and Plasma flat panels, 1 MB display memory and 512 KB frame buffer; flat panel power switching and adjustable LCD bias supplies. | |
CM112HR |
CM110 SVGA with IDE & floppy drive controllers. |
PC/104 Mass Storage Device Modules
PC/104 Storage Device utilityModules™ | ||
Part Number |
Description |
|
CMT6104 |
1.8" removable Flash drive or rotating IDE PCMCIA
ATA type drive carrier and interface for PC/104 Bus. External IDE interface on board. Drive not included. Operating Temperature -40° to +85°C |
|
CMT106 |
2.5" Flash or rotating IDE drive carrier and
interface for PC/104 Bus. 20 GB Drive included. |
|
CMT6106 |
2.5" Flash or rotating IDE drive carrier and
interface for PC/104 Bus. Drive not included. Operating Temperature -40° to +85°C |
|
CMT107 |
2.5" Flash or rotating IDE drive carrier and
interface for PC/104 Bus. External floppy and IDE interface on board. 20 GB Drive included. |
|
CMT6107 |
2.5" Flash or rotating IDE drive carrier and
interface for PC/104 Bus. External floppy and IDE interface on board. Drive not included. Operating Temperature -40° to +85°C |
|
CM6109HR-1 |
Single slot PCMCIA Intel compatible memory card
interface for Types I, II & III cards. Operating Temperature -40° to +85°C |
|
CM6109HR-2 |
Dual slot PCMCIA Intel compatible memory card
interface for Types I, II & III cards. Operating Temperature -40° to +85°C |
PC/104 Modem Modules
PC/104 Modem utilityModules™ | ||
Part Number |
Description |
|
GSM35-1 | Fully integrated GSM modem using Siemens TC35 dual band GSM engine
with interface through onboard 16C550 UART channel. Standard On-Board
SIM-card socket reader, Temperature sensing and 16 TTL level digital I/O
lines. Ideal for automotive and fleet management
systems. Operating Temperature -20° to +70°C |
|
SK-GSM35-1 | Starter Kit (developer's kit) for GSM35 includes: GSM35-1, adapter cable, flat antenna with 2.3 m cable (type MCA 1890 SQ/250), SIM card reader On-Board, software package | |
GSM35-2 | Fully integrated GSM modem using Siemens TC35 dual band GSM engine
with interface through onboard 16C550 UART channel. Standard External
SIM-card socket reader, Temperature sensing and 16 TTL level digital I/O
lines. Ideal for automotive and fleet management
systems. Operating Temperature -20° to +70°C |
|
SK-GSM35-2 | Starter Kit (developer's kit) for GSM35 includes: GSM35-1, adapter cable, flat antenna with 2.3 m cable (type MCA 1890 SQ/250), flat band cable with connectors (150 mm), external SIM card reader installed on PC-board with connector (41.5 x 45.5 mm) | |
EFM104HR | HighRel
Embedded data/fax/voice modem for industrial applications.V.90/56K modem
with Class 1/2 faxing at 14.4K. Standard AT-style commands. US/CAN/EURO
approved . Operating Temperature -40° to +85°C |
PC/104 GPS Satellite Receiver Modules
PC/104 GPS Satellite
Receiver | ||
Part Number |
Description |
|
GPS140HR |
NMEA-0183 Compatible GPS positioning board with 12 parallel-channel satellite receiver with differential GPS support. Direct interface through onboard 16C550 UART channel, ideal for automotive and fleet management systems. | |
SK-GPS140HR |
GPS140HR plus Active Antenna |
PC/104 Motion Control and Motor Interface Modules
PC/104 Motion Control and Motor Interface Boards | ||
PC/104 Servo Motor Control | ||
Part Number |
Description |
|
ESC629 |
2 Channel ultra compact DC servo motor control
board with powerful capabilities. Features include position, velocity and acceleration control, programmable PID loop filters and quadrature encoder motor feedback; 2 onboard H-bridges with 10A drive at 60V;24 TTL I/O. |
|
PC/104 Syncro/Resolver Interfaces | ||
Part Number |
Description |
|
ERES104 |
2-Channel PC/104 compliant embedded Syncro / Resolver / Inductosyn / LVDT interface board with programmable 10 to16-bit resolution and onboard programmable 400-1600Hz sine wave reference oscillator. | |
DDC49530 |
Resistor pack for ERES104 for 11.8V syncros | |
DDC49590 |
Resistor pack for ERES104 for 90V syncros |
PC/104 Power
Supply Modules | ||
Part Number |
Description |
|
HPWR104HR-75W |
75 Watt Power Supply
POWER INPUT RANGE: 8-30VDC input POWER OUTPUTS: + 5VDC @ 15A +12VDC @ 2A - 12VDC @.5A (1A max) + 5V and +/-12V is available for PC/104 Bus and external devices 75 Watt maximum combined output |
|
HPWR104HRTX-75W |
For use in IDAN Frame | |
IPWR104HR-L35W |
35 Watt Isolated Power
Supply POWER INPUT RANGE: 18-36VDC POWER OUTPUTS: + 5VDC @ 7A +12VDC @ 2A - 12VDC @500mA + 5V and +/-12V is available for PC/104 Bus and external devices 35 Watt maximum combined output |
|
IPWR104HR-H35W |
35 Watt Isolated Power
Supply POWER INPUT RANGE: 36-72VDC input POWER OUTPUTS: + 5VDC @ 7A +12VDC @ 2A - 12VDC @500mA + 5V and +/-12V is available for PC/104 Bus and external devices 35 Watt maximum combined output |
|
IPWR104HR-L60W |
60 Watt Isolated Power
Supply POWER INPUT RANGE: 18-36VDC POWER OUTPUTS: + 5VDC @ 12A +12VDC @ 2A - 12VDC @500mA + 5 V and +/-12V is available for PC/104 Bus and external devices 60 Watt maximum combined output |
|
IPWR104HR-H60W |
60 Watt Isolated Power
Supply POWER INPUT RANGE: 33-72VDC input POWER OUTPUTS: + 5VDC @ 12A +12VDC @ 2A - 12VDC @500mA + 5V and +/- 12V is available for PC/104 Bus and external devices 60 Watt maximum combined output |
|
IPWR104HR-L100W |
100 Watt Isolated Power
Supply POWER INPUT RANGE: 18-36VDC POWER OUTPUTS: + 5VDC @ 20A +12VDC @ 2A - 12VDC @500mA + 5V and +/-12V is available for PC/104 Bus and external devices 100 Watt maximum combined output |
|
IPWR104HR-H100W |
100 Watt Isolated Power
Supply POWER INPUT RANGE: 33-72VDC input POWER OUTPUTS: +5VDC @ 20A +12VDC @ 2A -12VDC @500mA +5V and +/-12V is available for PC/104 Bus and external devices 100 Watt maximum combined output |
PC/104 Uninterruptible Power Supply Modules
PC/104 Uninterruptible Power Supply Modules | ||
Part Number |
Description |
|
UPS25-1 |
PC/104 NiMH
UPS module with a 10 - 40V input range. Features include: onboard power management and charger for 8 AA NiMH cells, software controlled charging and system shutdown. System backup with 8 cells is 5 to 30 minutes depending on load and battery temperature. |
|
UPS25TX-1 |
For use in IDAN Frame | |
UPS25-2 |
PC/104 NiCd
UPS module with a 10 - 40V input range. Features include: onboard power management and charger for 8 AA NiCd cells, software controlled charging and system shutdown. System backup with 8 cells is 5 to 30 minutes depending on load and battery temperature. |
|
UPS25TX-2 |
For use in IDAN Frame | |
SK-UPS25-1 |
PC/104 NiMH
UPS module with a 10 - 40V input range and 8 1500 mAh AA cell pack
included. Features include: onboard power management and charger for 8 AA NiMH cells, software controlled charging and system shutdown. System backup with 8 cells is 5 to 30 minutes depending on load and battery temperature. |
|
SK-UPS25-2 |
PC/104 NiCd
UPS module with a 10 - 40V input range and 8 1000 mAh cell pack
included. Features include: onboard power management and charger for 8 AA NiCd cells, software controlled charging and system shutdown. System backup with 8 cells is 5 to 30 minutes depending on load and battery temperature. |
|
<<< Cpu Module <<< Utility Module <<< Data Module <<< Home |
686 PC/104 & PC/104-Plus 233 & 300 MHz
Std. I/O: SSD Socket, Keyboard, Parallel, PS/2 Mouse & Speaker
o CMM Std. I/O + 2 Serial & SVGA
o CMD 1Std. I/O + 2 Serial & 2 USB
o CMG 11Std. I/O + 1 Serial , 2 USB & SVGA
o CML Std. I/O + 2 Serial , 2 USB & 10/100 Mb Ethernet
o CMX 2 Serial, 2 USB, 16 Digital I/O, SVGA & 10/100 Mb Ethernet
586 / 486 PC/104 66, 100, & 200 MHz
Std. I/O: SSD Socket, Keyboard, Parallel & Speaker
o CMH Std. I/O + 2 Serial
o CMV Std. I/O + 2 Serial & 2nd SSD Socket
o CMI Std. I/O + 2 Serial , IDE & Flooy
o CMK Std. I/O + 2 Serial & 82527 CAN Bus
o CME Std. I/O + 2 Serial & Ethernet
Special Architecture CpuModules®
o PC/104-PLUS 300 MHZ 7686GX-3V and PC/104 CMI5486DXLC with 2 SSD & SuperXT
686 PCI Architecture PC/104 & PC/104-Plus CpuModules
CMC | ||
General Specs |
PROCESSOR: 64-Bit 686GX
MMXTM PentiumTM
Class, | |
PC/104 |
Speed || Memory || SSD || Exp. Bus || Power |
|
CMC16686GX233HR-32 | 233 MHz 32MB 2 ISA 5.0W | |
CMC16686GX300HR-32 | 300 MHz 32MB 1 ISA 5.8W | |
CMC16686GX300HR-128 | 300 MHz 128MB 1 ISA 5.8W | |
CMC16686GX300HR-256 | 300 MHz 256MB 1 ISA 5.8W | |
PC/104-Plus |
||
CMC17686GX233HR-32 |
233 MHz 32MB 2 ISA & PCI 5.0W | |
CMC17686GX300HR-32 |
300 MHz 32MB 2 ISA & PCI 5.8W | |
CMC17686GX300HR-128 |
300 MHz 128 MB 2 ISA & PCI 5.8W |
CMM | ||
General Specs |
PROCESSOR: 64-Bit 686GX MMXTM PentiumTM
Class, | |
PC/104 |
Speed || Memory || SSD || Exp. Bus || Power |
|
CMM16686GX233-32 |
233 MHz 32MB 1 ISA 5.5W |
|
CMM16686GX300-32 |
300 MHz 32MB 1 ISA 6.3W |
|
CMM16686GX300-128 |
300 MHz 128MB 1 ISA 6.3W |
|
CMM16686GX300-256 |
300 MHz 256MB 1 ISA 6.3W |
|
PC/104-Plus |
||
CMM17686GX233-32 |
233 MHz 32MB 2 ISA & PCI 5.5W |
|
CMM17686GX300-32 |
300 MHz 32MB 2 ISA & PCI 6.3W |
|
CMM17686GX300-128 |
300 MHz 128 MB 2 ISA & PCI 6.3W |
CMD | ||
General Specs |
PROCESSOR: 64-Bit 686GX
MMXTM PentiumTM
Class, | |
PC/104 |
Speed || Memory || SSD || Exp. Bus || Power |
|
CMD16686GX233HR-32 |
233 MHz 32MB 1 ISA 5.0W |
|
CMD16686GX300HR-32 |
300 MHz 32MB 1 ISA 5.8W |
|
CMD16686GX300HR-128 |
300 MHz 128MB 1 ISA 5.8W |
|
CMD16686GX300HR-256 |
300 MHz 256MB 1 ISA 5.8W |
|
PC/104-Plus |
||
CMD17686GX233HR-32 |
233 MHz 32MB 2 ISA & PCI 5.0W |
|
CMD17686GX300HR-32 |
300 MHz 32MB 2 ISA & PCI 5.8W |
|
CMD17686GX300HR-128 |
300 MHz 128MB 2 ISA & PCI 5.8W |
CMG | ||
General Specs |
PROCESSOR: 64-Bit 686GX
MMXTM PentiumTM
Class, 233 or 300 MHz PCI architecture MEMORY: Up to 256 MB SDRAM options listed below EXPANSION BUS: ISA and/or PCI options listed below I/O PORTS: ECP parallel, keyboard, PS/2 mouse and speaker SERIAL PORT: 1 software selectable 16C550 RS-232/422/485 USB PORTS: 2 Universal Serial Buses with inline connector interface SVGA: On-board display controller with 2D graphics accelerator and 2.5 MB 64-bit video memory SSD: 32 pin sockets support DOC, SRAM, FLASH & EPROM I/O CONNECTORS: .100" x .100" Headers I/O CABLES: XK-CM34 OS: Fail-Safe Boot ROM installed POWER: Listed below @ 5 VDC typical | |
PC/104 |
Speed || Memory || SSD || Exp. Bus || Power |
|
CMG16686GX233-32 |
233 MHz 32MB 1 ISA 5.5W |
|
CMG16686GX300-32 |
300 MHz 32MB 1 ISA 6.3W |
|
CMG16686GX300-64 |
300 MHz 64MB 1 ISA 6.3W |
|
CMG16686GX300-128 |
300 MHz 128MB 1 ISA 6.3W |
|
CMG16686GX300-256 |
300 MHz 256MB 1 ISA 6.3W |
|
PC/104-Plus |
|
|
CMG17686GX233-32 |
233 MHz 32MB 2 ISA & PCI 5.5W |
|
CMG17686GX300-32 |
300 MHz 32MB 2 ISA & PCI 6.3W |
|
CMG17686GX300-128 |
300 MHz 128 MB 2 ISA & PCI 6.3W |
CML | ||
General Specs |
PROCESSOR: 64-Bit 686GX MMXTM PentiumTM
Class, EXPANSION BUS: ISA | |
PC/104 |
Speed || Memory || SSD || Exp. Bus || Power |
|
CML16686GX233HR-32 |
233 MHz 32MB 1 ISA 5.0W |
|
CML16686GX300HR-32 |
300 MHz 32MB 1 ISA 5.8W |
|
CML16686GX300HR-128 |
300 MHz 128MB 1 ISA 5.8W |
|
CMLl27686HX300HR-32 |
Std. I/O Ports + 2 USB, 2 Serial Ports & 10/100Mb Ethernet,24DIGITAL I/O,32M |
|
CMLl27686HX300HR-128 |
Std. I/O Ports + 2 USB, 2 Serial Ports & 10/100Mb Ethernet,24DIGITAL I/O,128M |
CMX | ||
General Specs |
PROCESSOR: 64-Bit 686GX
MMXTM PentiumTM
Class, | |
PC/104 |
Speed || Memory || SSD || Exp. Bus || Power |
|
CMX27686HX300HR-32 |
300 MHz 32MB 1 ISA & PCI 6.3W |
|
CMX27686HX300HR-128 |
300 MHz 128MB 1 ISA & PCI 6.3W |
586 PCI Architecture PC/104 & PC/104-Plus CpuModules
CMH | ||
General Specs |
PROCESSOR:
64-Bit
586EX 200 MHz PCI architecture
| |
PC/104 |
Speed || Memory || SSD || Exp. Bus || Power |
|
CMH6586EX200HR-32 |
200 MHz 32MB 1 ISA 4.2W |
|
CMH6586EX200HR-128 |
200 MHz 128MB 1 ISA 4.2W |
486 PC/104 CpuModules
CMV | ||
General Specs |
PROCESSOR:
32-Bit 66 / 100
MHz 80x86DX | |
PC/104 |
Speed || Memory || Power |
|
CMV6486DX66HR-16 |
66 MHz 16MB 4.5W |
|
CMV6486DX66HR-32 |
66 MHz 32MB 4.5W |
|
CMV6486DX100HR-16 |
100 MHz 16MB 5.6W |
|
CMV6486DX100HR-32 |
100 MHz 32MB 5.6W |
CMI | ||
General Specs |
PROCESSOR:
32-Bit 66 / 100 MHz
80x86DX | |
PC/104 |
Speed || Memory || Power |
|
CMi6486DX66HR-16 |
66 MHz 16MB 4.5W |
|
CMi6486DX66HR-32 |
66 MHz 32MB 4.5W |
|
CMi6486DX100HR-16 |
100 MHz 16MB 5.6W |
|
CMi6486DX100HR-32 |
100 MHz 32MB 5.6W |
CMK | ||
General Specs |
PROCESSOR:
32-Bit 66 / 100 MHz
80x86DX | |
PC/104 |
Speed || Memory || Power |
|
CMK6486DX66HR-16 |
66 MHz 16MB 4.9W |
|
CMK6486DX66HR-32 |
66 MHz 32MB 4.9W |
|
CMK6486DX100HR-16 |
100 MHz 16MB 6.0W |
|
CMK6486DX100HR-32 |
100 MHz 32MB 6.0W |
CME | ||
General Specs |
PROCESSOR:
32-Bit 66 / 100 MHz
80x86DX | |
PC/104 |
Speed || Memory || Power |
|
CME6486DX66-16 |
66 MHz 16MB 4.9W |
|
CME6486DX66-32 |
66 MHz 32MB 4.9W |
|
CME6486DX100-16 |
100 MHz 16MB 6.0W |
|
CME6486DX100-32 |
100 MHz 32MB 6.0W |
Special Architecture CpuModules
7686GX-3V
Series | ||
General Specs |
PROCESSOR:
64-Bit 686
GeodeTM MMXTM PentiumTM
Class, | |
PC/104-Plus |
Speed || Memory || Power || Serial || USB || SVGA |
|
CMD7686GX300HR-3V-32 |
300 MHz 32MB 5.8W 2 2 |
|
CMD7686GX300HR-3V-128 |
300 MHz 128MB 5.8W 2 2 |
|
CMG7686GX300-3V-32 |
300 MHz 32MB 6.3W 1 2 1 |
|
CMG7686GX300-3V-128 |
300 MHz 128MB 6.3W 1 2 1 |
|
CMM7686GX300-3V-32 |
300 MHz 32MB 6.3W 2 1 |
|
CMM7686GX300-3V-128 |
300 MHz 128MB 6.3W 2 1 |
CMI | ||
General Specs |
PROCESSOR:
32-Bit 66 / 100 MHz
80x86DX | |
PC/104 |
Speed || Memory || Power |
|
CMi5486DXLC66HR-16 |
66 MHz 16MB 4.6W |
|
CMi5486DXLC100HR-16 |
100 MHz 16MB 5.6W |
CMF PC/104 CMF8680 14 MHz SuperXT? Processor with 5V ISA Expansion Bus Operating Temperature 0 to +70°C | ||
CMF8680-1 |
PROCESSOR:
14 MHz 8-Bit Super XT
|
|
CMF8680-2 |
CMF8680-1 with CMF102 single
slot PCMCIA memory card |
1
|
<<< Cpu Module <<< Utility Module <<< Data Module <<< Home |
固纬科技提供